With the new modular I/O module Qmix I/O-B you can include a variety of different digital and analog signals and sensors into your Qmix- and neMESYS system. The module consists of a controller, which is custom-fitted with individual I/O terminals, and can be optionally extended later with additional terminals. This enables an optimal adjustment of the Qmix I/O-B module to the application of the customer and to the customer's requirements.
Whether temperatures are to be measured with PT100 RTDs, or whether the customer prefers thermocouples - with the appropriate terminal configuration, both are possible. Whether analog voltage signals in the range 0-5 V must be evaluated or whether current signals of 0-20 mA are to be measured - both metrics can be captured with the module. If for most channels, a measurement resolution of 12 bits is sufficient, but a resolution of 16-bit is required for some signals, then this requirement is not a problem with the matching terminals.